Bosch · Oven Moderate

E501 — Undocumented (Confirm for Your Model)

E501 is not in Bosch's official US oven/microwave error-code list (which documents only E11 — touch keys/condensation — plus generic 'E and a number' catch-alls). The 'meat probe jack' meaning below could not be confirmed and may reflect a temp-sensor vs. meat-probe mix-up. Verify the exact meaning in your model's manual or with Bosch service before acting.

Keep using it?
Yes, with caution
DIY difficulty
Moderate

How to fix it

  1. Unplug the meat probe — if E501 clears, the probe itself is the most likely cause.
  2. Inspect the probe tip and cable for damage; replace if any visible.
  3. Clean the jack with a dry cotton swab and a shot of contact cleaner; let dry fully before powering back on.
  4. Re-test with a known-good Bosch probe.
  5. If E501 persists with no probe inserted, the jack/harness or control input is bad.

Why it happens

Typical signs: E501 displayed when probe is connected · Probe reading way off · Cook-by-probe mode won't start · Code clears when probe unplugged

  • Damaged meat probe Sheath cracked, internal thermistor open.
  • Food/grease in the probe jack Carbon bridges the contacts.
  • Bent jack contacts Forced insertion damaged the receptacle.
  • Wiring fault to the control Probe harness pinched behind cavity wall.

Parts you may need

If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.

  • Bosch oven meat probe Common replacement
    Amazon →

More Bosch oven codes

E005 E005 — Power Supply / Line Voltage Fault E011 E011 — Continuous Key Press Detected E0111 E0111 — Stuck Control Button E0511 E0511 — Cooling Fan Fault E0527 E0527 — Door Switch Fault E0531 E0531 — Convection Fan Fault

All Bosch codes → All oven codes →

Frequently asked questions

What does the E501 code mean on a Bosch oven?

E501 is not in Bosch's official US oven/microwave error-code list (which documents only E11 — touch keys/condensation — plus generic 'E and a number' catch-alls). The 'meat probe jack' meaning below could not be confirmed and may reflect a temp-sensor vs. meat-probe mix-up. Verify the exact meaning in your model's manual or with Bosch service before acting.

What causes the E501 code on a Bosch oven?

Damaged meat probe: Sheath cracked, internal thermistor open. Food/grease in the probe jack: Carbon bridges the contacts. Bent jack contacts: Forced insertion damaged the receptacle.

Is it safe to keep using a Bosch oven with a E501 error?

Yes, with caution. This is rated a moderate-severity fault.

How do I fix E501 on a Bosch oven?

Unplug the meat probe — if E501 clears, the probe itself is the most likely cause. Inspect the probe tip and cable for damage; replace if any visible. Clean the jack with a dry cotton swab and a shot of contact cleaner; let dry fully before powering back on.

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician.