10 — Fisher & Paykel Washer Fault 10 — Temperature Sensor Error
Fault 10 on a Fisher & Paykel top-load washer is a temperature-sensor error.
- Keep using it?
- Yes, with caution
- DIY difficulty
- Moderate
- Verified against
- support.fisherpaykel.com ↗
How to fix it
- Power off at the wall for a minute and retry.
- If Fault 10 returns, the temperature sensor needs to be tested/replaced (service recommended).
Why it happens
Typical signs: Washer stops · Fault 10 shown
- Faulty thermistor / temp sensor The temperature sensor has failed.
- Sensor wiring/connector fault A damaged sensor harness.
Parts you may need
If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.
- Fisher & Paykel Washer Thermistor Common replacementAmazon →
More Fisher & Paykel washer codes
Frequently asked questions
What does the 10 code mean on a Fisher & Paykel washer?
Fault 10 on a Fisher & Paykel top-load washer is a temperature-sensor error.
What causes the 10 code on a Fisher & Paykel washer?
Faulty thermistor / temp sensor: The temperature sensor has failed. Sensor wiring/connector fault: A damaged sensor harness.
Is it safe to keep using a Fisher & Paykel washer with a 10 error?
Yes, with caution. This is rated a moderate-severity fault.
How do I fix 10 on a Fisher & Paykel washer?
Power off at the wall for a minute and retry. If Fault 10 returns, the temperature sensor needs to be tested/replaced (service recommended).
Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: support.fisherpaykel.com.