KitchenAid · Oven Moderate

F2E1 — KitchenAid Range/Oven F2E1 — Keypad / Control Problem

F2E1 indicates a UI/keypad, control, or wiring problem. On some gas models it can also relate to cooktop grates installed incorrectly.

Keep using it?
Yes, with caution
DIY difficulty
Moderate
Typical cost
$150-400
Verified against
producthelp.kitchenaid.com ↗

The fix

Touchpad/control panel assembly

Shorted/stuck key on control panel

$150-400 moderate difficulty 60 min Tools: screwdriver, nut driver

Diagnose first: Try unplugging the oven for 5 minutes first. If error returns immediately on power-up, the touchpad has a stuck key.

Find this part on Amazon →

As an Amazon Associate we earn from qualifying purchases.

How to fix it

  1. On gas models, confirm the cooktop grates are seated correctly.
  2. Reset at the breaker for 1 minute; if F2E1 persists, the control panel needs service.

Why it happens

Typical signs: Panel unresponsive · F2E1 shown

  • Keypad/control fault A stuck key or control issue.
  • Grates installed wrong (gas) Wobbling/misplaced cooktop grates on some models.
  • Wiring fault A harness problem.

More KitchenAid oven codes

F0E0 Range/Oven F0E0 — Electronic Control Fault F1E0 F1E0 — Control board EEPROM/communication fault F1E2 F1E2 — Main relay board failure F1E5 F1E5 — Control calibration / cal data fault F2E0 Range/Oven F2E0 — Keypad / Control Problem F2E2 F2E2 — Touchpad cable disconnected

All KitchenAid codes → All oven codes →

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: producthelp.kitchenaid.com.