Speed Queen · Washer Moderate

Er FL — Speed Queen Er FL — Fill Error

Er FL means the wash tub did not reach the target fill level within 30 minutes during a fill step.

Keep using it?
Yes, with caution
DIY difficulty
Easy
Verified against
speedqueen.com ↗

How to fix it

  1. Confirm both supply faucets are fully open and the fill hoses are not kinked.
  2. Turn off the water, disconnect the fill hoses, and clean the inlet screens.
  3. Check the pressure-sensor air hose for cracks or loose connections.

Why it happens

Typical signs: Washer fills slowly or not at all · Cycle stalls during fill · Er FL on the display

  • Low or no water supply A partially closed supply faucet or low household water pressure at the inlets.
  • Clogged inlet filter screens Sediment packs the small screens where the fill hoses connect to the valve.
  • Pressure-sensor hose air leak A cracked or loose air hose to the pressure sensor mis-reads the water level.

Parts you may need

If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.

  • Washer Water Inlet Valve Common replacement
    Amazon →

More Speed Queen washer codes

Er bb Er bb — Broken Belt Error Er dL Er dL — Door Lock Fatal Error Er dr Er dr — Drain Error Er nF Er nF — No Water Flow Error Er oF Er oF — Overflow Error Er PS Er PS — Pressure Sensor Error

All Speed Queen codes → All washer codes →

Frequently asked questions

What does the Er FL code mean on a Speed Queen washer?

Er FL means the wash tub did not reach the target fill level within 30 minutes during a fill step.

What causes the Er FL code on a Speed Queen washer?

Low or no water supply: A partially closed supply faucet or low household water pressure at the inlets. Clogged inlet filter screens: Sediment packs the small screens where the fill hoses connect to the valve. Pressure-sensor hose air leak: A cracked or loose air hose to the pressure sensor mis-reads the water level.

Is it safe to keep using a Speed Queen washer with a Er FL error?

Yes, with caution. This is rated a moderate-severity fault.

How do I fix Er FL on a Speed Queen washer?

Confirm both supply faucets are fully open and the fill hoses are not kinked. Turn off the water, disconnect the fill hoses, and clean the inlet screens. Check the pressure-sensor air hose for cracks or loose connections.

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: speedqueen.com.