Whirlpool · Front-load washer Moderate
F9 E1 — Whirlpool F9 E1 — Long Drain (Not Draining)
F9 E1 means the washer is unable to drain correctly — the drain time exceeds the limit.
- Keep using it?
- Yes, with caution
- DIY difficulty
- Easy
- Verified against
- producthelp.whirlpool.com ↗
How to fix it
- Open the front-bottom panel, place a towel/tray, and clean the drain pump filter.
- Check the drain hose for kinks/clogs and correct standpipe depth.
- If it still will not drain, replace the drain pump.
Why it happens
Typical signs: Standing water in the drum · Will not spin · F9 E1 on the display
- Clogged drain pump filter / coin trap Debris in the front-access pump filter — the most common cause.
- Kinked or clogged drain hose The drain hose is pinched or blocked.
- Drain standpipe too deep A drain hose inserted too far can siphon and trip the code.
Parts you may need
If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.
- Whirlpool Washer Drain Pump Common replacementAmazon →
More Whirlpool front-load washer codes
Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: producthelp.whirlpool.com.