F5 — Watchdog / Control Self-Check (older)
Internal watchdog or self-check error on older EOCs. The control's processor did not complete its periodic self-check and the board has shut down to a safe state.
- Keep using it?
- Yes, with caution
- DIY difficulty
- Hard
- Verified against
- frigidaire.com ↗
How to fix it
- Breaker off 5 minutes, then restore.
- Inspect the keypad — make sure no buttons are stuck or binding in the glass; a shorted touchpad can trigger F5.
- If comfortable working around live voltage, verify both 120V legs of the 240V supply with a multimeter (or have an electrician check). If both supply legs are good and the keypad is clear, the electronic oven control is the likely fault.
- If F5 returns, replace the EOC.
- Install on a surge-protected circuit going forward.
Why it happens
Typical signs: F5 on display · Oven controls unresponsive · May return after every reset
- Failed electronic oven control Processor or supporting circuitry on the EOC has degraded.
- Brown-out / unstable supply voltage Low voltage trips the watchdog.
- Recent power surge Surge damaged the control.
- Shorted or stuck keypad A button binding in the control glass or a shorted touchpad can trip the self-check — check before condemning the EOC.
Parts you may need
If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.
- Frigidaire oven control board Common replacementAmazon →
More Frigidaire oven codes
Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: frigidaire.com.