Frigidaire · Oven Serious

F92 — Maximum Door-Open Time Exceeded

F92 is part of the Frigidaire F90-F94 door-lock family and indicates the maximum oven door-OPEN time was exceeded (the door stayed open too long, or the door light switch is misreading). It is not a latch-locked-vs-unlocked mismatch (those are F90/F91/F93/F94). Check the door switch and latch.

Keep using it?
Limited use only
DIY difficulty
Hard
Verified against
frigidaire.com ↗

How to fix it

  1. Power off.
  2. Remove the top panel and inspect the latch — manually move it to the unlocked position.
  3. Test each microswitch with a meter for proper open/close as the cam moves.
  4. Replace the door lock assembly if any switch fails the test.
  5. Reroute or repair any chafed harness wiring near the latch.

Why it happens

Typical signs: F92 at idle, not during cleaning · Oven won't bake or broil · Door reports locked when it's clearly open

  • Stuck or shorted lock microswitch Contacts welded closed or actuator tab bent.
  • Broken latch cam Cam jammed in the lock position.
  • Pinched harness shorting the switch wire Wire grounded against sheet metal.

Parts you may need

If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.

  • Frigidaire oven door lock assembly Common replacement
    Amazon →

More Frigidaire oven codes

F0 F0 — Electronic Oven Control (EOC) Failure F1 F1 — Shorted Keypad / Control Failure F10 F10 — Runaway Temperature F11 F11 — Shorted keypad button F12 Range/Oven F12 — Control Microprocessor Fault F13 Range/Oven F13 — Control Memory (EEPROM) Failure

All Frigidaire codes → All oven codes →

Frequently asked questions

What does the F92 code mean on a Frigidaire oven?

F92 is part of the Frigidaire F90-F94 door-lock family and indicates the maximum oven door-OPEN time was exceeded (the door stayed open too long, or the door light switch is misreading). It is not a latch-locked-vs-unlocked mismatch (those are F90/F91/F93/F94). Check the door switch and latch.

What causes the F92 code on a Frigidaire oven?

Stuck or shorted lock microswitch: Contacts welded closed or actuator tab bent. Broken latch cam: Cam jammed in the lock position. Pinched harness shorting the switch wire: Wire grounded against sheet metal.

Is it safe to keep using a Frigidaire oven with a F92 error?

Limited use only. This is rated a serious-severity fault.

How do I fix F92 on a Frigidaire oven?

Power off. Remove the top panel and inspect the latch — manually move it to the unlocked position. Test each microswitch with a meter for proper open/close as the cam moves.

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: frigidaire.com.