KitchenAid · Oven Moderate

F5E0 — Door switch fault

The control sees the door switch state as inconsistent — for example, the switch reports closed while the latch reports open, or vice versa.

Keep using it?
Yes, with caution
DIY difficulty
Moderate
Verified against
kitchenaid.com ↗

How to fix it

  1. Open and close the door firmly — listen for the click of the switch.
  2. Cut power, remove the top trim, and access the door switches.
  3. Test each switch with a meter (continuity changes when actuated).
  4. Replace any failed switch.
  5. Check door hinge tension — a sagging door can prevent the switch from closing.

Why it happens

Typical signs: F5E0 on display · Oven light stays on or off when it shouldn't · Self-clean cycle will not start · Oven may not heat

  • Failed door switch Microswitch in the door frame stuck or broken.
  • Misaligned door Door not seating square, switch plunger not actuating.
  • Wiring fault Door switch harness loose or broken.

Parts you may need

If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.

  • KitchenAid oven door switch Common replacement
    Amazon →

More KitchenAid oven codes

F0E0 Range/Oven F0E0 — Electronic Control Fault F1E0 F1E0 — Control board EEPROM/communication fault F1E2 F1E2 — Main relay board failure F1E5 F1E5 — Control calibration / cal data fault F2E0 Range/Oven F2E0 — Keypad / Control Problem F2E1 Range/Oven F2E1 — Keypad / Control Problem

All KitchenAid codes → All oven codes →

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: kitchenaid.com.