Maytag · Oven Serious

F5E1 — Door Latch Will Not Lock

The motorized door lock was commanded to lock (typically for self-clean) but the latch switch never confirmed the locked position.

Keep using it?
Limited use only
DIY difficulty
Moderate
Verified against
maytag.com ↗

How to fix it

  1. Cancel any self-clean cycle and let the oven cool.
  2. Inspect the latch area for debris or warpage.
  3. Disconnect power and remove the top panel to access the latch motor.
  4. Test the latch motor for continuity and inspect the cam.
  5. Replace the door lock assembly if the motor is open or jammed.

Why it happens

Typical signs: F5E1 during or after self-clean start · Audible latch motor running with no lock · Self-clean aborts

  • Failed door lock motor / assembly The motorized latch mechanism is jammed or burnt out.
  • Failed latch position switch The micro-switch reporting latch position has failed.
  • Obstruction at latch Food debris or warped door is preventing full latch travel.

Parts you may need

If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.

  • Oven door lock / latch assembly Common replacement
    Amazon →

More Maytag oven codes

F1E0 Range/Oven F1E0 — Oven Control or Wiring Problem F1E1 Range/Oven F1E1 — Oven Control or Wiring Problem F1E2 Range/Oven F1E2 — Oven Control or Wiring Problem F2 F2 — Oven Temperature Sensor, Control, or Wiring Problem F2E0 Range/Oven F2E0 — Keypad / Control Problem F3E0 F3E0 — Oven Temperature Sensor Open

All Maytag codes → All oven codes →

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: maytag.com.