Maytag · Oven Serious

F5E2 — Door Latch Will Not Unlock

After a self-clean cycle, the motorized door lock failed to release. The oven keeps the door locked as a safety measure.

Keep using it?
Limited use only
DIY difficulty
Moderate
Verified against
maytag.com ↗

How to fix it

  1. Allow the oven to cool fully — many latches will release once temp drops.
  2. Cycle power at the breaker for 5 minutes.
  3. If still locked, remove the top panel to manually release the latch cam.
  4. Test the latch motor and position switch for continuity.
  5. Replace the door lock assembly if either component has failed.

Why it happens

Typical signs: F5E2 displayed after self-clean · Door physically locked shut · Latch motor may hum

  • Failed door lock motor Motor cannot drive the cam back to the unlocked position.
  • Failed latch position switch Switch never reports the unlocked state.
  • Warped latch from extreme clean-cycle heat Mechanical binding in the latch.

Parts you may need

If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.

  • Oven door lock assembly Common replacement
    Amazon →

More Maytag oven codes

F1E0 Range/Oven F1E0 — Oven Control or Wiring Problem F1E1 Range/Oven F1E1 — Oven Control or Wiring Problem F1E2 Range/Oven F1E2 — Oven Control or Wiring Problem F2 F2 — Oven Temperature Sensor, Control, or Wiring Problem F2E0 Range/Oven F2E0 — Keypad / Control Problem F3E0 F3E0 — Oven Temperature Sensor Open

All Maytag codes → All oven codes →

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: maytag.com.