Maytag · Oven Moderate

F6E0 — Loss of Communication

The user interface board and the main control are not communicating. The control cannot accept input from the touch panel.

Keep using it?
Yes, with caution
DIY difficulty
Moderate
Verified against
maytag.com ↗

How to fix it

  1. Cut power for 5 minutes.
  2. Pull the oven and remove the rear/top access panel.
  3. Reseat the harness between the user interface and the main control board.
  4. Restore power and try a cycle.
  5. If F6E0 returns, swap the user interface board first; replace the main control if it persists.

Why it happens

Typical signs: F6E0 on display · Touchpad unresponsive · Oven will not start any cycle

  • Loose ribbon / harness between UI and main control Connector backed out or pin not seated.
  • Failed user interface board UI board has lost its communication interface.
  • Failed main control board Main control communication port has failed.

Parts you may need

If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.

  • Oven user interface (UI) board Common replacement
    Amazon →

More Maytag oven codes

F1E0 Range/Oven F1E0 — Oven Control or Wiring Problem F1E1 Range/Oven F1E1 — Oven Control or Wiring Problem F1E2 Range/Oven F1E2 — Oven Control or Wiring Problem F2 F2 — Oven Temperature Sensor, Control, or Wiring Problem F2E0 Range/Oven F2E0 — Keypad / Control Problem F3E0 F3E0 — Oven Temperature Sensor Open

All Maytag codes → All oven codes →

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: maytag.com.