Maytag · Oven Critical
F9E0 — Door Lock Failure (Lockout for Safety)
The control detected a critical door lock failure during a heating or self-clean cycle. The oven shuts down all heat as a safety lockout.
- Keep using it?
- No — service first
- DIY difficulty
- Hard
- Verified against
- maytag.com ↗
How to fix it
- Cut power at the breaker for 5 minutes and restore.
- Allow the oven to fully cool if the door is locked.
- Pull the oven and access the door latch motor and switches.
- Test latch motor and position switches for continuity.
- Replace the door latch assembly, harness, or EOC depending on which fails.
Why it happens
Typical signs: F9E0 displayed · Oven will not heat at all · Door may remain locked
- Failed door lock motor or switch assembly Latch hardware has failed mid-cycle.
- Wiring fault to latch assembly Open or shorted wire in the latch harness.
- Failed EOC Control cannot drive or read the latch correctly.
Parts you may need
If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.
More Maytag oven codes
F1E0 Range/Oven F1E0 — Oven Control or Wiring Problem F1E1 Range/Oven F1E1 — Oven Control or Wiring Problem F1E2 Range/Oven F1E2 — Oven Control or Wiring Problem F2 F2 — Oven Temperature Sensor, Control, or Wiring Problem F2E0 Range/Oven F2E0 — Keypad / Control Problem F3E0 F3E0 — Oven Temperature Sensor Open
Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: maytag.com.