Whirlpool · Dryer Moderate

F2E4 — User Interface Software Error

The user interface board has reported a software / firmware error. Often clears with a power-cycle; if not, the UI board has failed.

Keep using it?
Yes, with caution
DIY difficulty
Easy
Verified against
atoz1.com ↗

How to fix it

  1. Power-cycle at the breaker for 5 minutes.
  2. Run a Timed Dry and watch for one minute for the error to return.
  3. If F2E4 returns, plan on a UI board replacement.
  4. Confirm model number before ordering the replacement board.

Why it happens

Typical signs: F2E4 on display · Console behavior glitchy or frozen · Beeping with no input · Cycles won't advance

  • Transient firmware glitch A power blip or static event corrupted the UI's working state.
  • Failed UI board Bad memory or processor on the user interface board.

Parts you may need

If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.

  • User interface board Common replacement
    Amazon →

More Whirlpool dryer codes

AF AF — Airflow Restriction E1 E1 — Exhaust Thermistor Open/Shorted E2 E2 — Outlet (Exhaust) Thermistor Shorted Err Err — Door Not Fully Closed F01 F01 — Main electronic control board failure F02 F02 — User Interface / Keypad Failure

All Whirlpool codes → All dryer codes →

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: atoz1.com.