Whirlpool · Dryer Serious

F71 — User Interface Communication Failure

A variant of the F70 communication loss — the user interface board is no longer responding to messages from the main control. Buttons often stop working.

Keep using it?
Limited use only
DIY difficulty
Moderate
Verified against
producthelp.whirlpool.com ↗

How to fix it

  1. Power-cycle: breaker OFF for 5 minutes, then ON.
  2. Start a Timed Dry and watch for one full minute; many F71 events were one-time glitches.
  3. If F71 returns, unplug and open the console.
  4. Reseat the harness between the user interface and the main control board.
  5. Swap the user interface board if reseating doesn't fix it.
  6. If still no fix, replace the main control board.

Why it happens

Typical signs: F71 on display · Buttons do nothing · Display frozen or partly working · Cycle won't advance

  • Loose UI harness Communication cable between UI and main board is not seated.
  • Failed UI board The user interface board has died and the main board is reporting the silence.
  • Power-supply glitch Brownout or surge corrupted firmware state and a power-cycle clears it.

Parts you may need

If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.

  • User interface control board Common replacement
    Amazon →

More Whirlpool dryer codes

AF AF — Airflow Restriction E1 E1 — Exhaust Thermistor Open/Shorted E2 E2 — Outlet (Exhaust) Thermistor Shorted Err Err — Door Not Fully Closed F01 F01 — Main electronic control board failure F02 F02 — User Interface / Keypad Failure

All Whirlpool codes → All dryer codes →

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: producthelp.whirlpool.com.