E06 Moderate Moderate DIY

Bosch Dishwasher E06 — Door switch / lock fault

Bosch Dishwasher · Error code E06

What E06 Means

Control board is not getting a valid door-closed signal even when the door appears closed.

Most Likely Fix

Door switch / door lock fault

PartDoor lock / interlock assembly
Typical cost$30-65
Difficultymoderate
Time30 min

Tools: screwdriver

Diagnose first: Control does not see the door confirmed closed; latch microswitch is the usual culprit.

Find this part on Amazon →

Symptoms

  • Cycle will not start
  • Pause icon stays on
  • Door seems closed but error persists

Common Causes

1
Door latch misaligned

Latch hook not engaging the strike fully.

2
Failed door switch

Microswitch in the latch assembly open-circuited.

3
Broken latch spring

Worn spring lets the latch pop loose mid-cycle.

4
Wiring harness to switch

Pinched or broken wire at the top of the door.

How to Fix It

  1. Press firmly on the door upper-right and see if cycle resumes.
  2. Inspect the latch hook for play or alignment issues.
  3. Open the inner door panel and locate the door switch assembly.
  4. Test the microswitch with a meter (continuity on close).
  5. Replace the door latch / switch assembly if faulty.

Parts You May Need

If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.

Common replacement Bosch dishwasher door latch assembly View on Amazon→

More Bosch Dishwasher Codes

E01 E01 — Control board fault E02 E02 — Heating element / NTC sensor fault E03 E03 — Water not heating E04 E04 — Water flow / flow meter fault E05 E05 — Overfill / float switch tripped E07 E07 — Drying fan fault

All Bosch codes → All dishwasher codes →

Verified against manufacturer documentation: bosch-home.com

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician.