Bosch · Dishwasher Moderate

E07 — Drying fan fault

Per Bosch's official US error-code page, E07 means the Zeolite (Crystal Dry) fan motor is defective.

Keep using it?
Yes, with caution
DIY difficulty
Moderate
Typical cost
$40-90
Verified against
bosch-home.com ↗

The fix

Drying fan / vent fan motor

Drying fan fault

$40-90 moderate difficulty 45 min Tools: screwdriver, nut driver

Diagnose first: Fan motor seized or wiring open; typical on CrystalDry / condensation-dry models.

Find this part on Amazon →

As an Amazon Associate we earn from qualifying purchases.

How to fix it

  1. Fan motor seized or wiring open; typical on CrystalDry / condensation-dry models.
  2. If diagnosis confirms the fault, replace the drying fan / vent fan motor (typical cost $40-90, about 45 min, moderate DIY).

Why it happens

Typical signs: E07 shown on the display · Drying fan fault

  • Most likely: Drying fan / vent fan motor Fan motor seized or wiring open; typical on CrystalDry / condensation-dry models.

More Bosch dishwasher codes

E01 E01 — Control board fault E02 E02 — Heating element / NTC sensor fault E03 E03 — Water not heating E04 E04 — Water flow / flow meter fault E05 E05 — Overfill / float switch tripped E06 E06 — Door-Closure or Aqua (Turbidity) Sensor Fault

All Bosch codes → All dishwasher codes →

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: bosch-home.com.