EF2 — Too much detergent / oversudsing
The control detected excessive suds during the wash or rinse. The washer pauses and runs extended rinses to break down foam.
- Keep using it?
- Yes — fix when convenient
- DIY difficulty
- Easy
- Verified against
- frigidaire.com ↗
How to fix it
- Run an extra Rinse & Spin to clear suds.
- Switch to HE-rated detergent.
- Use 1-2 tablespoons of HE detergent per normal load.
- If you have soft water, halve the recommended dose.
Why it happens
Typical signs: Cycle lengthens unexpectedly · Visible suds in door window · EF2 displayed near end of cycle
- Non-HE detergent used Standard detergent foams excessively in front-loaders.
- Too much HE detergent Most loads need only 1-2 tablespoons of HE.
- Soft water amplifies sudsing Less detergent is needed in soft water areas.
Parts you may need
If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.
- HE laundry detergent Common replacementAmazon →
More Frigidaire washer codes
Frequently asked questions
What does the EF2 code mean on a Frigidaire washer?
The control detected excessive suds during the wash or rinse. The washer pauses and runs extended rinses to break down foam.
What causes the EF2 code on a Frigidaire washer?
Non-HE detergent used: Standard detergent foams excessively in front-loaders. Too much HE detergent: Most loads need only 1-2 tablespoons of HE. Soft water amplifies sudsing: Less detergent is needed in soft water areas.
Is it safe to keep using a Frigidaire washer with a EF2 error?
Yes — fix when convenient. This is rated a minor-severity fault.
How do I fix EF2 on a Frigidaire washer?
Run an extra Rinse & Spin to clear suds. Switch to HE-rated detergent. Use 1-2 tablespoons of HE detergent per normal load.
Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: frigidaire.com.