Drip Tray Full Minor Easy DIY

Keurig Coffee Maker Drip Tray Full — empty drip tray

Keurig Coffee Maker · Error code Drip Tray Full

What Drip Tray Full Means

Indicated on K-Supreme and K-Cafe with float-based drip tray sensors. Empty the tray and reseat. Not a fault — just full-cup overflow protection.

Symptoms

  • 'Empty Drip Tray' message
  • Float visible above the drip tray grate
  • Brewer may pause cycles

Common Causes

1
Drip tray genuinely full

Float lifted by accumulated overflow

2
Stuck float

Float jammed in raised position

How to Fix It

  1. Slide out the drip tray
  2. Empty the contents into the sink
  3. Rinse and wipe the tray, then check the float moves freely
  4. Reinstall the tray firmly into the brewer
  5. Resume brewing

More Keurig Coffee Maker Codes

Add Water Add Water Light — reservoir low or sensor fault All Lights Blinking All Lights Blinking — internal water flow or sensor fault Auto Off Auto Off — power-save shutdown Brewer Needs Reset Brewer Needs Reset — control board lockup Brew Interrupted Brew Interrupted — cycle aborted mid-brew Descale Light Descale Light — mineral buildup detected

All Keurig codes → All coffee maker codes →

Verified against manufacturer documentation: keurig.com

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician.