Keurig · Coffee Maker Moderate

Brew Interrupted — cycle aborted mid-brew

Displayed on K-Supreme, K-Elite, and K-Cafe touchscreen/LED models when the brewer detects a flow problem partway through a cycle. The brewer aborts to prevent overheating the heater dry.

Keep using it?
Yes, with caution
DIY difficulty
Easy
Typical cost
$6-10
Verified against
keurig.com ↗

The fix

Keurig needle cleaning tool

Pod grounds or scale restricting flow through the entrance/exit needles

$6-10 easy difficulty 10 min

Diagnose first: A paper clip works for a one-time clear; the tool is worth it if this recurs. Only descale if cleaning the needles doesn't stop repeat interruptions.

Find this part on Amazon →

Didn't resolve it? Next suspect: Keurig Descaling Solution ($10-15)

As an Amazon Associate we earn from qualifying purchases.

How to fix it

  1. Lift the handle, discard the pod, and clean the entrance and exit needles with a paper clip
  2. Wipe the pod holder clean and reinstall
  3. Confirm the reservoir is filled and firmly seated
  4. Run a water-only cycle to clear the lines
  5. Try a fresh K-Cup; avoid pre-punctured or refillable pods packed too tightly
  6. If repeated, perform a full descale

Why it happens

Typical signs: Brew Interrupted message on display · Partial cup dispensed · Brewer beeps and powers down or returns to home · Repeats on subsequent attempts

  • K-Cup grounds clogging exit needle Espresso-grind or oily pod debris restricts flow
  • Scale restricting flow Partial blockage in internal tubing
  • Air introduced mid-cycle Reservoir bumped loose during brew
  • Pod inserted incorrectly K-Cup not fully seated or punctured off-center

More Keurig coffee maker codes

Add Water Add Water Light — reservoir low or sensor fault All Lights Blinking All Lights Blinking — internal water flow or sensor fault Auto Off Auto Off — power-save shutdown Brewer Needs Reset Brewer Needs Reset — control board lockup Descale Light Descale Light — mineral buildup detected Drip Tray Full Drip Tray Full — empty drip tray

All Keurig codes → All coffee maker codes →

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: keurig.com.