F1E2 Moderate Moderate DIY

KitchenAid Refrigerator F1E2 — Control Board EEPROM Error

KitchenAid Refrigerator · Error code F1E2

What F1E2 Means

The main control board could not read its non-volatile memory (EEPROM) where temperature settings and calibration are stored.

Symptoms

  • F1E2 on display
  • Settings reset to defaults at random
  • Temperature behavior erratic
  • Display may reboot intermittently

Common Causes

1
Corrupted EEPROM

Memory chip on main board failed or corrupted from a surge.

2
Failed main control board

Broader board failure manifesting as memory error.

3
Power surge event

Recent brownout or surge scrambled stored values.

How to Fix It

  1. Unplug refrigerator for 5 minutes to attempt a clean reboot.
  2. Reset temperature settings and try again.
  3. If F1E2 returns, replace the main control board.
  4. Install a surge protector to prevent recurrence.

Parts You May Need

If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.

Common replacement Refrigerator main control board View on Amazon→

More KitchenAid Refrigerator Codes

CE CE — Communication Error F1E1 F1E1 — Main Control Board Fault F2E1 F2E1 — Keypad/Tact Switch Stuck F2E2 F2E2 — User Interface Communication Lost F3E1 F3E1 — Fresh Food Thermistor Fault F3E2 F3E2 — Freezer Thermistor Fault

All KitchenAid codes → All refrigerator codes →

Verified against manufacturer documentation: kitchenaid.com

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician.