F17 — Lower convection fan error
The lower-oven convection fan is not turning when commanded, or its feedback is missing for more than ~1 minute during a convection cycle.
- Keep using it?
- Yes, with caution
- DIY difficulty
- Moderate
- Verified against
- lgparts.com ↗
How to fix it
- Power down at the breaker.
- Remove the lower-cavity rear convection cover and spin the blade by hand — must spin free.
- Tighten blade hub or replace bent blade.
- Disconnect the motor at its plug and measure winding resistance against service-manual spec.
- Replace lower convection fan motor if open or seized.
- If the motor checks good, verify line voltage to the motor plug while the control commands convection; if absent, replace the main control board.
Why it happens
Typical signs: F17 or F-17 on display · Lower convection cycle quits · No fan noise from lower cavity · Upper oven and standard bake still work
- Lower convection fan motor seized Bearings failed from heat fatigue.
- Fan blade loose and binding on shroud Hub backed off; blade tilts and scrapes.
- Open winding in motor Motor reads infinite — coil opened.
- Wiring or relay fault on main control board Relay never closes or harness opened.
Parts you may need
If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.
- LG lower convection fan motor Common replacementAmazon →
More LG oven codes
Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: lgparts.com.