What causes the F6E4 code on a Maytag dishwasher?

Dishwasher not level: An out-of-level unit tilts water onto the float. Overfill/float switch triggered by tilt: The float reads water due to the tilt.

Maytag · Dishwasher Minor

F6E4 — Dishwasher Not Level

F6E4 means the dishwasher is not level, which actuates the overfill/float switch.

Keep using it?: Yes — fix when convenient
DIY difficulty: Easy
Verified against: producthelp.maytag.com ↗

How to fix it

Check that the dishwasher is level front-to-back and side-to-side.
Adjust the leveling legs as needed, then re-run.

Why it happens

Typical signs: Cycle interrupted · F6E4 shown

Dishwasher not level An out-of-level unit tilts water onto the float.
Overfill/float switch triggered by tilt The float reads water due to the tilt.

Parts you may need

If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.

Appliance Level Tool Common replacement
Amazon →

More Maytag dishwasher codes

F1E1 F1E1 — Control Board Failure F2E1 F2E1 — Stuck Key on Control Panel F2E2 F2E2 — User Interface Communication Error F3E1 F3E1 — Thermistor / OWI Sensor Failure F3E2 F3E2 — Thermistor Open / Out of Range F4E1 F4E1 — Heater Circuit Fault

All Maytag codes → All dishwasher codes →

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: producthelp.maytag.com.