Maytag · Microwave Minor

PF — Power Failure

The microwave lost power (utility outage, breaker trip, or unplug event) and is prompting the user to reset the clock.

Keep using it?
Yes — fix when convenient
DIY difficulty
Easy
Verified against
maytag.com ↗

How to fix it

  1. Press Cancel/Off to clear the PF code.
  2. Set the clock as you normally would.
  3. If PF returns repeatedly without a known outage, check the outlet voltage with a multimeter.
  4. Inspect the power cord and outlet for damage or looseness.
  5. If on a GFCI or AFCI outlet, test the outlet for nuisance tripping.
  6. If the issue is frequent, have an electrician check the circuit.

Why it happens

Typical signs: PF flashing on display after power restored · Clock not set · Microwave otherwise functions normally

  • Recent power outage Utility power was interrupted.
  • Tripped breaker Circuit breaker tripped briefly.
  • Loose plug Microwave was momentarily unplugged or outlet is loose.
  • Brownout Low voltage event reset the control.

More Maytag microwave codes

door 'door' — Door Not Closed / Open Reminder F1E1 F1E1 — Main Control Board Failure F1E2 F1E2 — Control / User-Interface Fault F2E1 F2E1 — Stuck Key on Keypad F2E2 F2E2 — User Interface Mismatch F3E1 F3E1 — Humidity Sensor Failure

All Maytag codes → All microwave codes →

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: maytag.com.