F4E1 Moderate Moderate DIY

Maytag Refrigerator F4E1 — Ice Maker / Auger Motor Fault

Maytag Refrigerator · Error code F4E1

What F4E1 Means

Control detected a fault in the icemaker motor or auger motor circuit — either no feedback during expected operation or an over-current condition.

Symptoms

  • F4E1 displayed
  • Auger does not turn when dispensing ice
  • Ice clumped in bin
  • Loud grinding from icemaker

Common Causes

1
Jammed auger

Ice clump stalling the motor.

2
Failed auger motor

Motor windings open or seized.

3
Failed icemaker module

Optical sensor or motor in module failed.

4
Wiring break in door harness

Conductor broken at hinge for door-mounted icemakers.

How to Fix It

  1. Remove the ice bin and inspect for ice clumps — clear and dry the bin.
  2. Verify the auger turns freely by hand with no ice present.
  3. Test the auger motor for continuity per service sheet.
  4. Inspect the door wiring harness through the upper hinge.
  5. Replace the auger motor or icemaker module as indicated.
  6. Run a manual icemaker test cycle to verify operation.

Parts You May Need

If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.

Common replacement Auger motor View on Amazon→ Common replacement Icemaker module View on Amazon→

More Maytag Refrigerator Codes

5uL 5uL — Sound Level Setting CF CF — Communication Failure (UI to Main) dE dE — Defrost System Error ER ER — General Error / Sensor Fault F1E1 F1E1 — Main Control Board Failure F2E1 F2E1 — Dispenser UI Communication Error

All Maytag codes → All refrigerator codes →

Verified against manufacturer documentation: maytag.com

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician.