Samsung · Washer Moderate

OE — Overflow error

Overflow error - too much water in tub.

Keep using it?
Yes, with caution
DIY difficulty
Moderate
Typical cost
$30-60
Verified against
samsung.com ↗

The fix

Water level pressure sensor (switch)

Overflow error - too much water in tub

$30-60 moderate difficulty 45 min Tools: screwdriver, nut driver

Diagnose first: Pressure switch hose can also be kinked or clogged - inspect before replacing the sensor.

Find this part on Amazon →

Didn't resolve it? Next suspect: Water inlet valve assembly ($25-50)

As an Amazon Associate we earn from qualifying purchases.

How to fix it

  1. Pressure switch hose can also be kinked or clogged - inspect before replacing the sensor.
  2. If diagnosis confirms the fault, replace the water level pressure sensor (switch) (typical cost $30-60, about 45 min, moderate DIY).
  3. Still throwing OE? Test the water inlet valve assembly next ($25-50).

Why it happens

Typical signs: OE shown on the display · Overflow error

  • Most likely: Water level pressure sensor (switch) Pressure switch hose can also be kinked or clogged - inspect before replacing the sensor.
  • Next most likely: Water inlet valve assembly If the primary fix does not resolve the code, this is the next part to test.

More Samsung washer codes

3C 3C / 3E — Motor Fault 4C 4C / 4E — Water Supply Error 4C2 4C2 — Hot water connected to cold inlet 4E 4E — Water supply error (older code, same as 4C) 5C 5C / 5E / SC — Will Not Drain 5E 5E — Drain error (older code, same as 5C)

All Samsung codes → All washer codes →

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: samsung.com.