Sud — / 5d — Too Many Suds
Sud (or 5d) means the washer detected excessive suds and paused to let them dissipate before continuing, which can extend the cycle.
- Keep using it?
- Yes — fix when convenient
- DIY difficulty
- Easy
- Typical cost
- $40-80
- Verified against
- samsung.com ↗
The fix
Drain pump assembly
Excess suds detected
Diagnose first: First switch to HE (High Efficiency) detergent and use less - 1-2 tablespoons. Run tub-clean cycle 2-3 times. Only replace pump if code persists after detergent fix.
Find this part on Amazon →As an Amazon Associate we earn from qualifying purchases.
How to fix it
- Let the cycle run — the washer usually clears suds on its own.
- Use less detergent next time (HE machines need very little).
- Switch to HE detergent if you were using standard.
- Run a rinse-only cycle to clear residual foam.
Why it happens
Typical signs: Cycle pauses and extends · Excess foam visible · Sud or 5d on the display
- Too much detergent Over-dosing, or using non-HE detergent in an HE washer, creates excess suds.
- Wrong detergent type Only HE (High Efficiency) detergent should be used in HE washers.
Other parts sometimes needed
If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.
- HE Washing Machine Detergent Common replacementAmazon →
More Samsung washer codes
Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: samsung.com.