Whirlpool · Microwave Minor

Door — / Open Door Closed — Safety Reminder

Displayed when the door has been closed for 5 minutes or more without a cycle being started. It's a safety reminder, not a fault.

Keep using it?
Yes — fix when convenient
DIY difficulty
Easy
Verified against
producthelp.whirlpool.com ↗

How to fix it

  1. Open the door and close it firmly, then start your cycle within a few seconds.
  2. On a new install, remove all packing material from inside the cavity and around the door.
  3. Reposition or remove the cooking rack if installed.
  4. If the message keeps returning with a clean, properly-shut door, move on to the door interlock diagnostics (see F5E0/F5E1).

Why it happens

Typical signs: 'Door' or 'Open Door Closed' appears in the display · Microwave beeps when you try to start

  • Door closed but no cycle started within 5 minutes Whirlpool's intended behavior on most current OTR / built-in models.
  • Packing material blocking the door On a brand-new install, foam or plastic bumpers can keep the door from fully closing.
  • Cooking rack out of position If equipped, the rack can keep the door from latching cleanly.

More Whirlpool microwave codes

AccuPop Fail AccuPop Fail — Popcorn Sensor Fault Demo Demo Mode — Not Heating F1E4 F1E4 — Appliance Manager or Power Relay Fault F1E5 F1E5 — Inverter Internal Fault F2 F2 — Keypad / Control Fault F2E1 F2E1 — Stuck Key / Keypad Fault

All Whirlpool codes → All microwave codes →

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: producthelp.whirlpool.com.