Amana · Dryer Moderate

E2 — Thermistor Shorted (legacy display)

Older display format — thermistor reading shorted (very low resistance). Equivalent to F22 with shorted state.

Keep using it?
Yes, with caution
DIY difficulty
Moderate
Verified against
amana.com ↗

How to fix it

  1. Unplug the dryer.
  2. Inspect the thermistor harness for damage or pinch points.
  3. Measure thermistor resistance — replace if it reads near zero.
  4. Verify wiring is routed away from sharp edges.
  5. If wiring and thermistor check good, replace the main control.

Why it happens

Typical signs: E2 displayed · Overheating concerns · Cycle aborts · Erratic temperature

  • Shorted thermistor Internal short in sensor body.
  • Pinched wire to ground Harness chafed against metal cabinet.
  • Failed control board Sense circuit reading low.

Parts you may need

If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.

More Amana dryer codes

AF AF — Restricted Air Flow E1 E1 — Thermistor Open (legacy display) Ed Ed — End of cycle / drying complete indication issue F01 F01 — Main Control Board Failure F02 F02 — Keypad / User Interface Stuck F22 F22 — Outlet Thermistor Fault

All Amana codes → All dryer codes →

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: amana.com.