Amana · Dryer Moderate

F24 — Temperature Thermistor Out of Range

F24 indicates the dryer temperature thermistor (temperature sensor) is reading out of range (open or shorted). It is NOT the moisture sensor — the moisture-sensor "two metal strips in the drum" faults are F28/F29 on this platform. Test the thermistor resistance and wiring.

Keep using it?
Yes, with caution
DIY difficulty
Moderate
Verified against
producthelp.amana.com ↗

How to fix it

  1. Open the door and locate the two metal strips inside the drum opening.
  2. Clean both strips with rubbing alcohol and a soft cloth.
  3. Run a sensor cycle to see if F24 clears.
  4. If still failing, unplug and access the front bulkhead to inspect the sensor wires.
  5. Reseat the moisture sensor connector.
  6. Replace the moisture sensor if continuity is open.

Why it happens

Typical signs: F24 displayed · Auto cycles end immediately · Clothes under-dried on sensor cycles · Timed dry still works

  • Dirty moisture sensor bars Fabric softener buildup insulates the bars — clean with rubbing alcohol.
  • Disconnected sensor wire Wire to sensor unseated from the harness at the front bulkhead.
  • Failed moisture sensor Internal break in the sensor strip.
  • Failed main control ACU sense input failed.

Parts you may need

If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.

  • Amana dryer thermistor Common replacement
    Amazon →

More Amana dryer codes

AF AF — Restricted Air Flow E1 E1 — Thermistor Open (legacy display) E2 E2 — Thermistor Shorted (legacy display) F01 F01 — Main Control Board Failure F02 F02 — Keypad / User Interface Stuck F22 F22 — Outlet Thermistor Fault

All Amana codes → All dryer codes →

Frequently asked questions

What does the F24 code mean on a Amana dryer?

F24 indicates the dryer temperature thermistor (temperature sensor) is reading out of range (open or shorted). It is NOT the moisture sensor — the moisture-sensor "two metal strips in the drum" faults are F28/F29 on this platform. Test the thermistor resistance and wiring.

What causes the F24 code on a Amana dryer?

Dirty moisture sensor bars: Fabric softener buildup insulates the bars — clean with rubbing alcohol. Disconnected sensor wire: Wire to sensor unseated from the harness at the front bulkhead. Failed moisture sensor: Internal break in the sensor strip.

Is it safe to keep using a Amana dryer with a F24 error?

Yes, with caution. This is rated a moderate-severity fault.

How do I fix F24 on a Amana dryer?

Open the door and locate the two metal strips inside the drum opening. Clean both strips with rubbing alcohol and a soft cloth. Run a sensor cycle to see if F24 clears.

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: producthelp.amana.com.