Amana · Dryer Serious

F26 — Drive Motor Fault

The main control did not detect proper drive motor operation. Motor may not start, may stall, or feedback signal is missing.

Keep using it?
Limited use only
DIY difficulty
Moderate

How to fix it

  1. Unplug the dryer.
  2. Open the cabinet and verify the drive belt is intact and routed properly.
  3. Spin the drum and blower wheel by hand to check for binding.
  4. Inspect motor harness connections.
  5. Test motor windings for continuity per the tech sheet.
  6. Replace seized blower, broken belt, or failed motor as indicated.

Why it happens

Typical signs: F26 displayed · Drum won't turn · Humming with no rotation · Motor starts then stops

  • Seized blower or drum bearing Mechanical bind prevents motor from spinning up.
  • Broken drive belt Belt off or broken — motor spins but drum doesn't move; some models flag F26.
  • Failed drive motor Open motor winding or burned start switch on the motor.
  • Bad harness to motor Connector loose or wire broken.
  • Failed main control ACU motor drive circuit failure.

Parts you may need

If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.

More Amana dryer codes

AF AF — Restricted Air Flow E1 E1 — Thermistor Open (legacy display) E2 E2 — Thermistor Shorted (legacy display) F01 F01 — Main Control Board Failure F02 F02 — Keypad / User Interface Stuck F22 F22 — Outlet Thermistor Fault

All Amana codes → All dryer codes →

Frequently asked questions

What does the F26 code mean on a Amana dryer?

The main control did not detect proper drive motor operation. Motor may not start, may stall, or feedback signal is missing.

What causes the F26 code on a Amana dryer?

Seized blower or drum bearing: Mechanical bind prevents motor from spinning up. Broken drive belt: Belt off or broken — motor spins but drum doesn't move; some models flag F26. Failed drive motor: Open motor winding or burned start switch on the motor.

Is it safe to keep using a Amana dryer with a F26 error?

Limited use only. This is rated a serious-severity fault.

How do I fix F26 on a Amana dryer?

Unplug the dryer. Open the cabinet and verify the drive belt is intact and routed properly. Spin the drum and blower wheel by hand to check for binding.

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician.