E13 Minor Easy DIY

Bosch Refrigerator E13 — Ice Maker Fault

Bosch Refrigerator · Error code E13

What E13 Means

The ice maker reports it did not complete a fill or harvest cycle within the expected window. Ice production stops but normal refrigeration continues.

Symptoms

  • E13 displayed
  • No new ice produced
  • Ice bin not advancing
  • Water line gurgling without fill

Common Causes

1
Ice maker not turned on

On/off switch or menu setting is off.

2
Water filter clogged or missing

Insufficient flow to complete a fill.

3
Frozen fill tube

Water has frozen in the inlet line to the ice maker.

4
Failed inlet valve

Solenoid not opening on command.

5
Failed ice maker module

Internal motor, thermostat, or board failure.

How to Fix It

  1. Confirm the ice maker is enabled in the menu / via its switch.
  2. Replace the water filter if old or restricted; bypass to test if available.
  3. Unplug the unit and thaw the fill tube at the back-top of the freezer with warm water.
  4. Verify household water supply is on and the line is not kinked.
  5. Cycle the ice maker test mode (small button on the module) to confirm fill and harvest.
  6. Replace the inlet valve or ice maker module if the test cycle fails.

Parts You May Need

If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.

More Bosch Refrigerator Codes

All Bosch codes → All refrigerator codes →

Verified against manufacturer documentation: bosch-home.com

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician.