Bosch · Washer Moderate

E16 — Door Open During Cycle

Per Bosch's official US error-code page (listed as E16/E34/F16/F34), this means the door is not locked properly. Bosch's instructions: close the door properly until it clicks audibly — a full load may prevent the door from closing — then restart the program.

Keep using it?
Yes, with caution
DIY difficulty
Easy
Verified against
bosch-home.com ↗

How to fix it

  1. Open the door, redistribute the load to under 2/3 drum volume.
  2. Press the door firmly closed until you hear a click.
  3. Inspect the door strike hook for wear or play.
  4. Replace the door hook if loose or cracked.
  5. If error persists with a properly closed door, replace the door lock assembly.

Why it happens

Typical signs: Cycle interrupts and beeps · Door light flashing · Wash stopped mid-program · Door unlocks before cycle ends

  • Door not fully latched User did not press firmly until click was heard.
  • Overloaded drum forcing door slightly open Bulky load pressing against the inner door.
  • Worn door strike Hook no longer holds tightly under vibration.
  • Intermittent door lock PTC interlock releases briefly under heat.

Parts you may need

If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.

  • Door strike hook kit Common replacement
    Amazon →
  • Door lock assembly Common replacement
    Amazon →

More Bosch washer codes

E01 E01 — Door Lock Fault E02 E02 — Motor Fault E03 E03 — Door Lock Fault E04 E04 — Water Inlet Fault E05 E05 — Heating Element Fault E06 E06 — Door Lock Circuit Fault

All Bosch codes → All washer codes →

Frequently asked questions

What does the E16 code mean on a Bosch washer?

Per Bosch's official US error-code page (listed as E16/E34/F16/F34), this means the door is not locked properly. Bosch's instructions: close the door properly until it clicks audibly — a full load may prevent the door from closing — then restart the program.

What causes the E16 code on a Bosch washer?

Door not fully latched: User did not press firmly until click was heard. Overloaded drum forcing door slightly open: Bulky load pressing against the inner door. Worn door strike: Hook no longer holds tightly under vibration.

Is it safe to keep using a Bosch washer with a E16 error?

Yes, with caution. This is rated a moderate-severity fault.

How do I fix E16 on a Bosch washer?

Open the door, redistribute the load to under 2/3 drum volume. Press the door firmly closed until you hear a click. Inspect the door strike hook for wear or play.

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: bosch-home.com.