Bosch · Washer Moderate
E17 — Water Inlet Time Exceeded
Per Bosch's official US error-code page (listed as E17/F17/F29), this means the filters in the water connection or the AquaStop hose are blocked, or the water pressure is too low. Bosch's instructions: clean the filters in the water supply hose.
- Keep using it?
- Yes, with caution
- DIY difficulty
- Easy
- Verified against
- bosch-home.com ↗
How to fix it
- Verify both water supply valves are fully open.
- Disconnect and clean the inlet hose screens.
- Check pressure at another nearby faucet for comparison.
- Inspect hoses for kinks or crush damage.
- If supply is good but error persists, replace the inlet valve assembly.
Why it happens
Typical signs: Cycle stops at fill · Drum partially filled · Long pauses at start of wash · Inlet valve clicks repeatedly
- Closed or partially closed supply valve Faucet at wall not fully open.
- Restricted inlet hose screens Sediment clogs mesh filters at hose ends.
- Low household water pressure Below the 14 PSI minimum, fill never completes.
- Weak inlet valve solenoid Valve opens partially due to weak coil.
- Kinked fill hose Hose bent behind the machine.
Parts you may need
If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.
More Bosch washer codes
Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: bosch-home.com.