4-6 — Chamberlain 4-6 — Safety-Sensor Condition on Close Command
4-6 means a safety-sensor condition (as in 1-1 or 1-2) was present when the opener was commanded to close. Check the safety sensors and wiring. It is not a logic-board RPM/interrupter fault. (Diagnostic meaning corrected against the official Chamberlain Group / LiftMaster Security+ 2.0 chart; flash-code meanings can vary by opener family — confirm for your exact model.)
- Keep using it?
- Yes, with caution
- DIY difficulty
- Easy
- Typical cost
- $25-40
- Verified against
- chamberlain.com ↗
The fix
Chamberlain/LiftMaster Safety Sensor Kit (041-0136, replaces 41A5034)
Safety sensor condition present at close command
Diagnose first: Same sensor family as 1-1/1-2 — check alignment and wiring first.
Find this part on Amazon →As an Amazon Associate we earn from qualifying purchases.
How to fix it
- Clear/realign the safety sensors until the LEDs are steady.
- Check the sensor wiring.
Why it happens
Typical signs: Door will not close · Flash code 4-6
- Safety-sensor condition present at close command A 1-1/1-2 sensor condition existed when the opener was commanded to close.
Other parts sometimes needed
If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.
- Garage door opener safety sensors Common replacementAmazon →
More Chamberlain garage door opener codes
Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: chamberlain.com.