Frigidaire · Dishwasher Moderate

Cd — Door Not Closed / Latched

Cd indicates the dishwasher door was not successfully closed and latched, so the cycle will not start or resume. Make sure the door is fully shut until the latch engages. If the door is closed and it still shows Cd, the latch, strike, or door switch needs attention.

Keep using it?
Yes, with caution
DIY difficulty
Easy
Verified against
frigidaire.com ↗

How to fix it

  1. Firmly close the door and confirm the latch engages.
  2. Check that no dishes or racks block the door from closing fully.
  3. Inspect the latch and strike for damage or misalignment.
  4. Test the door switch/latch for continuity; replace the latch assembly if it fails.

Why it happens

Typical signs: Cd shown on the display · Cycle will not start or resume · Door appears closed but is not recognized as latched

  • Door not fully latched Push the door firmly until the latch clicks. Items sticking out of the racks can block it.
  • Door latch / strike misaligned or failed The latch assembly or strike plate is worn, bent, or broken.
  • Door switch fault The switch that confirms the door is closed has failed or its wiring is open.

Parts you may need

If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.

  • Frigidaire dishwasher door latch assembly Common replacement
    Amazon →

More Frigidaire dishwasher codes

CL CL — Close the door ER ER — General electronic control fault Hot Hot — Water inlet too hot HS HS — Wash Motor Hall Sensor Error i10 i10 — Water Not Detected (Fill) i20 i20 — Drain Blocked

All Frigidaire codes → All dishwasher codes →

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: frigidaire.com.