What causes the CL code on a Frigidaire dishwasher?

Door not latched fully: Most common — push the door firmly until it clicks. Item blocking the door: Tall handle on a pot or pan keeping the door from closing. Failed door latch switch: Switch contacts no longer make on a latched door.

Frigidaire · Dishwasher Minor

CL — Close the door

The door is not fully latched. The dishwasher will not start a cycle until the door switch closes.

Keep using it?: Yes — fix when convenient
DIY difficulty: Easy
Verified against: frigidaire.com ↗

How to fix it

Open and reload to remove anything contacting the door.
Close firmly and listen for the latch to click.
Inspect the strike on the tub and the latch on the door for damage.
With the dishwasher powered off, test the door switch for continuity when latched.
Replace the door latch assembly if the switch is bad or alignment is off.

Why it happens

Typical signs: CL displayed on start · Cycle does not begin · Beeping with door appearing closed

Door not latched fully Most common — push the door firmly until it clicks.
Item blocking the door Tall handle on a pot or pan keeping the door from closing.
Failed door latch switch Switch contacts no longer make on a latched door.
Misaligned door / strike Hinges sagged or strike plate loose.

Parts you may need

If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.

Frigidaire dishwasher door latch assembly Common replacement
Amazon →

More Frigidaire dishwasher codes

Cd Cd — Door Not Closed / Latched ER ER — General electronic control fault Hot Hot — Water inlet too hot HS HS — Wash Motor Hall Sensor Error i10 i10 — Water Not Detected (Fill) i20 i20 — Drain Blocked

All Frigidaire codes → All dishwasher codes →

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: frigidaire.com.