SH — Sensor Circuit Shorted
Shorted-circuit indication on a temperature sensor input — generic sensor-shorted fault.
- Keep using it?
- Yes, with caution
- DIY difficulty
- Moderate
- Verified against
- frigidaire.com ↗
How to fix it
- Unplug refrigerator.
- Identify which compartment displays SH.
- Ohm the corresponding thermistor — replace if shorted.
- Inspect wiring for shorts and dry out any wet connectors.
- Replace main board if sensor and wiring are good.
Why it happens
Typical signs: SH shown in temperature display · Compartment runs warm or cold · Cycling issues
- Shorted thermistor Element failed closed.
- Wire shorted to chassis Conductor grounded.
- Moisture in connector Drain water bridges pins.
Parts you may need
If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.
- Thermistor sensor Common replacementAmazon →
Related repair guides
More Frigidaire refrigerator codes
Frequently asked questions
What does the SH code mean on a Frigidaire refrigerator?
Shorted-circuit indication on a temperature sensor input — generic sensor-shorted fault.
What causes the SH code on a Frigidaire refrigerator?
Shorted thermistor: Element failed closed. Wire shorted to chassis: Conductor grounded. Moisture in connector: Drain water bridges pins.
Is it safe to keep using a Frigidaire refrigerator with a SH error?
Yes, with caution. This is rated a moderate-severity fault.
How do I fix SH on a Frigidaire refrigerator?
Unplug refrigerator. Identify which compartment displays SH. Ohm the corresponding thermistor — replace if shorted.
Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: frigidaire.com.