GE · Dishwasher Minor

1h — Delay Start Active

1h (one hour) indicates a delay-start countdown is active. The dishwasher will start automatically when the countdown ends. Not a fault.

Keep using it?
Yes — fix when convenient
DIY difficulty
Easy
Verified against
geappliances.com ↗

How to fix it

  1. Press Start/Reset (or hold Start for 3 seconds) to cancel the delay.
  2. If a cycle is in progress, allow it to drain, then press Start/Reset again.
  3. Re-select your desired cycle and press Start without pressing Delay.
  4. Close the door firmly within 4 seconds of pressing Start so the cycle latches in.

Why it happens

Typical signs: 1h, 2h, 4h, or 8h on display · Cycle won't start immediately · Dishwasher appears idle but powered on

  • Delay Start button pressed User or accidental press of the Delay Start pad scheduled a delayed run.
  • Saved delay from previous cycle Some models remember delay preference between runs.

More GE dishwasher codes

888 888 — Display Self-Test / Demo C1 C1 Error — Slow Drain (Over 2 Minutes) C2 C2 Error — Drain Cycle Too Long (Over 7 Minutes) C4 C4 — Overfill / Filled Twice After Power Loss C5 C5 — Underfill / Short Drain Time C7 C7 — Water Temperature Sensor (Thermistor) Fault

All GE codes → All dishwasher codes →

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: geappliances.com.