LG · Washer Serious

CE — Overcurrent Error

CE (Current Error) means the motor drew more current than allowed — usually from an overload or a motor/control fault.

Keep using it?
Limited use only
DIY difficulty
Moderate
Typical cost
$120-280
Verified against
lg.com ↗

The fix

Main control board / inverter PCB

Motor overcurrent error

$120-280 hard difficulty 90 min Tools: screwdriver, nut driver

Diagnose first: Usually the inverter board's power stage fails; a shorted motor winding can cause it as well.

Find this part on Amazon →

Didn't resolve it? Next suspect: Drive motor / stator assembly ($100-220)

As an Amazon Associate we earn from qualifying purchases.

How to fix it

  1. Remove some laundry and restart.
  2. Unplug for 1 minute to reset.
  3. If CE persists, have the motor and control board tested.

Why it happens

Typical signs: Cycle stops during spin · CE on the display

  • Overloaded drum Too much laundry strains the motor.
  • Motor or control fault A failing motor or control board draws excess current.

Other parts sometimes needed

If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.

  • LG Washer Hall Sensor Common replacement
    Amazon →

More LG washer codes

AE AE — Leak (Front-Load) or Drum Drive Fault (Top-Load) CL CL — Child Lock Is On dE dE / dE1 / dE2 Error — Door Will Not Lock dE1 dE1 — Door not fully closed dE2 dE2 — Door closed but won't lock dHE dHE — Drying heater error (combo / WashTower)

All LG codes → All washer codes →

Frequently asked questions

What does the CE code mean on a LG washer?

CE (Current Error) means the motor drew more current than allowed — usually from an overload or a motor/control fault.

What causes the CE code on a LG washer?

Overloaded drum: Too much laundry strains the motor. Motor or control fault: A failing motor or control board draws excess current.

Is it safe to keep using a LG washer with a CE error?

Limited use only. This is rated a serious-severity fault.

How do I fix CE on a LG washer?

Remove some laundry and restart. Unplug for 1 minute to reset. If CE persists, have the motor and control board tested.

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: lg.com.