IE — Error — Water Inlet / Fill Problem
IE (Inlet Error) means the washer did not fill to the target water level within the allowed time. The control board sees the water level is too low after the fill step.
- Keep using it?
- Yes, with caution
- DIY difficulty
- Easy
- Typical cost
- $30-60
- Verified against
- lg.com ↗
The fix
Water inlet valve
Inlet/fill error - water not filling within time limit
Diagnose first: Clogged inlet screens from sediment are most common; a failed solenoid valve is next.
Find this part on Amazon →Didn't resolve it? Next suspect: Inlet hose screens / mesh filters ($5-15)
As an Amazon Associate we earn from qualifying purchases.
How to fix it
- Confirm both supply valves are fully open and the home has normal water pressure.
- Turn off the valves, disconnect the fill hoses, and clean the inlet screens.
- Straighten any kinks in the hoses.
- If fill is still slow/absent, test the inlet valve solenoids and replace the valve if faulty.
Why it happens
Typical signs: Washer will not fill or fills very slowly · Cycle stalls at the start · IE on the display
- Water supply valves not fully open The hot/cold faucets behind the washer must be open all the way.
- Clogged inlet screens Mesh filter screens where the fill hoses connect to the valve trap sediment.
- Kinked fill hoses A pinched supply hose restricts flow.
- Faulty water inlet valve A failed valve will not open electrically.
Related repair guides
More LG washer codes
Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: lg.com.