LG · Washer Minor

PF — Power failure mid-cycle

The washer lost power during a cycle. PF tells you the unit remembers what it was doing and is ready to resume — it is not a hardware fault unless it keeps coming back.

Keep using it?
Yes — fix when convenient
DIY difficulty
Easy
Verified against
lg.com ↗

How to fix it

  1. Press Start/Pause to resume the cycle once power is back.
  2. If it won't resume, unplug the washer for 1 minute, then press and hold Start/Pause for 5 seconds while unplugged.
  3. Plug back in and start a fresh cycle.
  4. If PF returns repeatedly, plug a known-good appliance into the same outlet to test it.
  5. Check the breaker — reset if tripped; if it trips again, call an electrician.
  6. Inspect the washer's power cord at the back terminal block for scorching or loose lugs.
  7. Repeated PF on a confirmed-good outlet points to a failing main control board — call for service.

Why it happens

Typical signs: PF appears after a power blink · Cycle paused mid-wash · Recurs on the same outlet

  • Utility power blink or outage Brief grid drop while a cycle was running.
  • Tripped breaker A heater or motor on the same circuit can trip the breaker.
  • Loose plug or outlet Vibration walks a loose plug partly out of the receptacle.
  • Ground-fault outlet tripping GFCI tripping repeatedly points to a real fault.
  • Failing power cord or terminal block Burned or corroded terminal block kills power intermittently.

More LG washer codes

AE AE — Leak (Front-Load) or Drum Drive Fault (Top-Load) CE CE — Overcurrent Error CL CL — Child Lock Is On dE dE / dE1 / dE2 Error — Door Will Not Lock dE1 dE1 — Door not fully closed dE2 dE2 — Door closed but won't lock

All LG codes → All washer codes →

Frequently asked questions

What does the PF code mean on a LG washer?

The washer lost power during a cycle. PF tells you the unit remembers what it was doing and is ready to resume — it is not a hardware fault unless it keeps coming back.

What causes the PF code on a LG washer?

Utility power blink or outage: Brief grid drop while a cycle was running. Tripped breaker: A heater or motor on the same circuit can trip the breaker. Loose plug or outlet: Vibration walks a loose plug partly out of the receptacle.

Is it safe to keep using a LG washer with a PF error?

Yes — fix when convenient. This is rated a minor-severity fault.

How do I fix PF on a LG washer?

Press Start/Pause to resume the cycle once power is back. If it won't resume, unplug the washer for 1 minute, then press and hold Start/Pause for 5 seconds while unplugged. Plug back in and start a fresh cycle.

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: lg.com.