Maytag · Washer Moderate

E1 F9 — Long drain time

Long drain time.

Keep using it?
Yes, with caution
DIY difficulty
Moderate
Typical cost
$40-80
Verified against
producthelp.maytag.com ↗

The fix

Drain pump

Long drain time

$40-80 moderate difficulty 60 min Tools: screwdriver, nut driver, pliers

Diagnose first: Clear the pump filter first. Check standpipe height (30-96 inches) and that drain hose isn't pushed too deep into the standpipe creating siphon.

Find this part on Amazon →

As an Amazon Associate we earn from qualifying purchases.

How to fix it

  1. Clear the pump filter first. Check standpipe height (30-96 inches) and that drain hose isn't pushed too deep into the standpipe creating siphon.
  2. If diagnosis confirms the fault, replace the drain pump (typical cost $40-80, about 60 min, moderate DIY).

Why it happens

Typical signs: E1 F9 shown on the display · Long drain time

  • Most likely: Drain pump Clear the pump filter first. Check standpipe height (30-96 inches) and that drain hose isn't pushed too deep into the standpipe creating siphon.

More Maytag washer codes

F1E1 F1E1 — Main control board failure F21 F21 — Long Drain / Drain Error F22 F22 — Door lock fault (front-load) F2E1 F2E1 — Stuck key on user interface F33 F33 — Pump driver / electrical fault F3E1 F3E1 — Pressure sensor fault

All Maytag codes → All washer codes →

Frequently asked questions

What does the E1 F9 code mean on a Maytag washer?

Long drain time.

What causes the E1 F9 code on a Maytag washer?

Most likely: Drain pump: Clear the pump filter first. Check standpipe height (30-96 inches) and that drain hose isn't pushed too deep into the standpipe creating siphon.

Is it safe to keep using a Maytag washer with a E1 F9 error?

Yes, with caution. This is rated a moderate-severity fault.

How do I fix E1 F9 on a Maytag washer?

Clear the pump filter first. Check standpipe height (30-96 inches) and that drain hose isn't pushed too deep into the standpipe creating siphon. If diagnosis confirms the fault, replace the drain pump (typical cost $40-80, about 60 min, moderate DIY).

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: producthelp.maytag.com.