Maytag · Washer Moderate

F22 — Door lock fault (front-load)

Door lock fault (front-load).

Keep using it?
Yes, with caution
DIY difficulty
Moderate
Typical cost
$40-90
Verified against
producthelp.maytag.com ↗

The fix

Door lock assembly

Door lock fault (front-load)

$40-90 moderate difficulty 45 min Tools: screwdriver, torx bit

Diagnose first: Inspect door strike alignment before replacing — a bent strike won't engage the lock even with a new assembly.

Find this part on Amazon →

As an Amazon Associate we earn from qualifying purchases.

How to fix it

  1. Inspect door strike alignment before replacing — a bent strike won't engage the lock even with a new assembly.
  2. If diagnosis confirms the fault, replace the door lock assembly (typical cost $40-90, about 45 min, moderate DIY).

Why it happens

Typical signs: F22 shown on the display · Door lock fault (front-load)

  • Most likely: Door lock assembly Inspect door strike alignment before replacing — a bent strike won't engage the lock even with a new assembly.

More Maytag washer codes

E1 F9 E1 F9 — Long drain time F1E1 F1E1 — Main control board failure F21 F21 — Long Drain / Drain Error F2E1 F2E1 — Stuck key on user interface F33 F33 — Pump driver / electrical fault F3E1 F3E1 — Pressure sensor fault

All Maytag codes → All washer codes →

Frequently asked questions

What does the F22 code mean on a Maytag washer?

Door lock fault (front-load).

What causes the F22 code on a Maytag washer?

Most likely: Door lock assembly: Inspect door strike alignment before replacing — a bent strike won't engage the lock even with a new assembly.

Is it safe to keep using a Maytag washer with a F22 error?

Yes, with caution. This is rated a moderate-severity fault.

How do I fix F22 on a Maytag washer?

Inspect door strike alignment before replacing — a bent strike won't engage the lock even with a new assembly. If diagnosis confirms the fault, replace the door lock assembly (typical cost $40-90, about 45 min, moderate DIY).

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: producthelp.maytag.com.