Samsung · Oven Serious

E-27 — Temperature Sensor Open Circuit

Older-style display of an open oven temperature sensor circuit. Resistance reads very high (>2950 ohms) versus the expected ~1080 ohms at room temp.

Keep using it?
Limited use only
DIY difficulty
Moderate
Typical cost
$20-50
Checked against
manualslib.com manufacturer manual seen via a third-party republisher, which we do not link — re-sourcing to the manufacturer is pending

The fix

Oven temperature sensor (RTD probe)

Oven temperature sensor open circuit

$20-50 easy difficulty 30 min Tools: screwdriver, nut driver, multimeter

Diagnose first: Open sensor wire or failed RTD. Test sensor resistance before replacing - should be ~1080 ohms cold.

Find this part on Amazon →

As an Amazon Associate we earn from qualifying purchases.

How to fix it

  1. Power off at the breaker before working inside.
  2. Locate and unplug the oven temperature sensor.
  3. Measure resistance — should be roughly 1080 ohms at room temp; >2950 ohms confirms an open sensor.
  4. Replace the sensor if open.
  5. Inspect the harness end-to-end for breaks if a new sensor still reads open at the PCB.

Why it happens

Typical signs: E-27 at startup or when bake is selected · Oven refuses to heat · Sometimes alternates with E-28

  • Open RTD sensor Sensor element failed open.
  • Open harness wire Wire between sensor and main PCB broken.
  • Unseated connector Plug at main PCB backed out.

Related repair guides

Oven Temperature Is Off — How to Calibrate It →

More Samsung oven codes

---- ---- — Invalid Temperature Setting -dC- -dC- — Flex Duo Divider Missing or Removed -dE- -dE- — Flex Duo Divider Not Installed bAd LinE bAd LinE — Bad Power Connection C-10 Range C-10 — Temperature Sensor Reading Error C-20 C-20 — Oven Temperature Sensor Open/Short

All Samsung codes → All oven codes →

Frequently asked questions

What does the E-27 code mean on a Samsung oven?

Older-style display of an open oven temperature sensor circuit. Resistance reads very high (>2950 ohms) versus the expected ~1080 ohms at room temp.

What causes the E-27 code on a Samsung oven?

Open RTD sensor: Sensor element failed open. Open harness wire: Wire between sensor and main PCB broken. Unseated connector: Plug at main PCB backed out.

Is it safe to keep using a Samsung oven with a E-27 error?

Limited use only. This is rated a serious-severity fault.

How do I fix E-27 on a Samsung oven?

Power off at the breaker before working inside. Locate and unplug the oven temperature sensor. Measure resistance — should be roughly 1080 ohms at room temp; >2950 ohms confirms an open sensor.

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. How we verify: manualslib.com — manufacturer manual seen via a third-party republisher, which we do not link — re-sourcing to the manufacturer is pending.