Samsung · Oven Moderate

Err — Generic Fault

Samsung's documented generic error: the control board logged a fault it can't classify with a specific code. Always start with a hard power reset.

Keep using it?
Yes, with caution
DIY difficulty
Easy
Verified against
samsung.com ↗

How to fix it

  1. Cut power at the breaker for 5+ minutes, then restore.
  2. Try a cook cycle and watch for a more specific code to appear.
  3. If 'Err' returns immediately on power-up, the main control board has likely failed — replace it.
  4. Document any other codes that appear before 'Err' for service reference.

Why it happens

Typical signs: 'Err' displayed without a number · Oven won't accept commands · May follow a power blip

  • Glitch from a power event Brownout/surge corrupted controller state.
  • Underlying fault not yet specific Another component is failing but hasn't returned its code yet.
  • Failed main control board PCB itself faulty.

Parts you may need

If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.

  • Samsung oven main control board Common replacement
    Amazon →

More Samsung oven codes

---- ---- — Invalid Temperature Setting -dC- -dC- — Flex Duo Divider Installed in Single Mode -dE- -dE- — Flex Duo Divider Not Installed bAd LinE bAd LinE — Bad Power Connection C-10 Range C-10 — Temperature Sensor Reading Error C-20 C-20 — Oven Temperature Sensor Open/Short

All Samsung codes → All oven codes →

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: samsung.com.