Samsung · Refrigerator Moderate

PC CH — Communication Check

Companion to PC ER — the control is repeatedly trying to re-establish handshake with a panel or sub-board. Same root cause: harness or board issue between the main PCB and the door display.

Keep using it?
Yes, with caution
DIY difficulty
Easy
Verified against
samsung.com ↗

How to fix it

  1. Unplug for 5 minutes; plug back in.
  2. Open and inspect the door-to-cabinet harness; reseat both ends.
  3. Look for corrosion or bent pins; clean with electronics contact cleaner.
  4. If error persists after reseating, swap or replace the door sub-PCB.
  5. Replace the main PCB if the door board doesn't resolve it.

Why it happens

Typical signs: PC CH cycling on display · Door panel intermittently dark · Buttons unresponsive

  • Intermittent harness contact Connector seated but with corroded or bent pins.
  • EMI / surge after storm Boards de-synced; power cycle usually clears it.
  • Door sub-PCB failing Marginal communication chip.

More Samsung refrigerator codes

21E 21E / 21C — Freezer Fan Fault 22E 22E / 22C — Fridge Fan Error 33 E 33 E — Ice Pipe Heater Error 39 C 39 C — Ice Maker Communication / Sensor Error 39 E 39 E — Ice Maker Function Error 40 E 40E — Ice Room Fan Error

All Samsung codes → All refrigerator codes →

Frequently asked questions

What does the PC CH code mean on a Samsung refrigerator?

Companion to PC ER — the control is repeatedly trying to re-establish handshake with a panel or sub-board. Same root cause: harness or board issue between the main PCB and the door display.

What causes the PC CH code on a Samsung refrigerator?

Intermittent harness contact: Connector seated but with corroded or bent pins. EMI / surge after storm: Boards de-synced; power cycle usually clears it. Door sub-PCB failing: Marginal communication chip.

Is it safe to keep using a Samsung refrigerator with a PC CH error?

Yes, with caution. This is rated a moderate-severity fault.

How do I fix PC CH on a Samsung refrigerator?

Unplug for 5 minutes; plug back in. Open and inspect the door-to-cabinet harness; reseat both ends. Look for corrosion or bent pins; clean with electronics contact cleaner.

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: samsung.com.