What causes the F2E1 code on a Amana dishwasher?

Physical debris under a button: Food or detergent residue jammed a key. Failed touchpad/membrane: Carbon trace worn or shorted internally. Damaged ribbon cable to control board: Bent or pinched connector causes false key signal.

Amana · Dishwasher Moderate

F2E1 — Stuck Key on Control Panel

The control detects a button being held down continuously, suggesting a stuck or shorted key.

Keep using it?: Yes, with caution
DIY difficulty: Easy
Verified against: amana.com ↗

How to fix it

Clean the control panel surface thoroughly.
Disconnect power and inspect the ribbon cable between panel and control board.
Reseat the ribbon connector firmly.
If the error persists, replace the touchpad/control panel assembly.
Test all buttons after repair.

Why it happens

Typical signs: Cycle will not start · Button feels mushy or stuck · Repeating beeps · Display shows F2E1

Physical debris under a button Food or detergent residue jammed a key.
Failed touchpad/membrane Carbon trace worn or shorted internally.
Damaged ribbon cable to control board Bent or pinched connector causes false key signal.

Parts you may need

If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.

Amana dishwasher touchpad / control panel Common replacement
Amazon →

More Amana dishwasher codes

Clean Light Flashing 1 Time Clean Light Flashing 1x — Control Lockout Clean Light Flashing 7 Times Clean Light Flashing 7x — Heating Element Failure F1E1 F1E1 — Control Board Failure F3E1 F3E1 — Thermistor / OWI Sensor Failure F4E1 F4E1 — Door Switch Open F4E2 F4E2 — Door Switch Wiring Error

All Amana codes → All dishwasher codes →

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: amana.com.