Amana · Dishwasher Moderate

F7E1 — Flow Meter Fault

The flow meter is not reporting correct water volume during the fill cycle.

Keep using it?
Yes, with caution
DIY difficulty
Moderate
Verified against
amana.com ↗

How to fix it

  1. Disconnect power and water supply.
  2. Access the inlet hose connection at the sump.
  3. Inspect the flow meter for debris and clean if needed.
  4. Test flow meter wiring continuity.
  5. Replace the flow meter assembly if defective.

Why it happens

Typical signs: Inconsistent fill levels · Cycle takes much longer than normal · Poor wash performance

  • Failed flow meter Hall sensor or impeller damaged.
  • Debris jamming the impeller Hard water deposits or food particles.
  • Wiring fault to flow meter Connector loose at sump.

Parts you may need

If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.

  • Amana Dishwasher Flow Meter Assembly Common replacement
    Amazon →

More Amana dishwasher codes

Clean Light Flashing 1 Time Clean Light Flashing 1x — Control Lockout Clean Light Flashing 7 Times Clean Light Flashing 7x — Heating Element Failure F1E1 F1E1 — Control Board Failure F2E1 F2E1 — Stuck Key on Control Panel F3E1 F3E1 — Thermistor / OWI Sensor Failure F4E1 F4E1 — Door Switch Open

All Amana codes → All dishwasher codes →

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: amana.com.