Amana · Dishwasher Moderate

F4E1 — Door Switch Open

The control cannot confirm the door is closed and latched, even though a cycle was requested.

Keep using it?
Yes, with caution
DIY difficulty
Easy
Verified against
amana.com ↗

How to fix it

  1. Open and firmly close the door, ensuring it latches.
  2. Inspect the latch and strike plate for damage or obstruction.
  3. Disconnect power and test the door switch continuity with a multimeter.
  4. Replace the door latch assembly if the switch fails.
  5. Verify the cycle starts after repair.

Why it happens

Typical signs: Cycle will not start · Door appears closed but indicator shows open · Beeping when door is closed

  • Misaligned door latch Door not fully engaging the strike.
  • Failed door switch Switch contacts no longer make.
  • Broken latch assembly Plastic latch components cracked.

Parts you may need

If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.

  • Amana dishwasher door latch assembly Common replacement
    Amazon →

More Amana dishwasher codes

Clean Light Flashing 1 Time Clean Light Flashing 1x — Control Lockout Clean Light Flashing 7 Times Clean Light Flashing 7x — Heating Element Failure F1E1 F1E1 — Control Board Failure F2E1 F2E1 — Stuck Key on Control Panel F3E1 F3E1 — Thermistor / OWI Sensor Failure F4E2 F4E2 — Door Switch Wiring Error

All Amana codes → All dishwasher codes →

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: amana.com.