Amana · Dishwasher Serious

F8E2 — Fill Valve Electric Error

Amana's documentation lists F8E2 as a fill valve electric error — an electrical fault in the water inlet (fill) valve circuit, not a spray-arm diverter motor problem.

Keep using it?
Limited use only
DIY difficulty
Moderate
Verified against
producthelp.amana.com ↗

How to fix it

  1. Disconnect power and water to the dishwasher.
  2. Locate the water inlet valve connection under the drip tray at the front base of the unit and inspect it for a loose, corroded, or damaged connector.
  3. Reseat the connector and restore power; run a cycle to see if F8E2 returns.
  4. If it returns, schedule a qualified appliance technician to test the fill valve coil and replace the valve if it's open or shorted.

Why it happens

Typical signs: F8E2 displayed · Dishwasher fails to fill or fills incorrectly · Cycle stops shortly after start

  • Water inlet (fill) valve electrical fault The fill valve solenoid circuit has an electrical fault — an open/shorted coil or a wiring problem at the valve.

Parts you may need

If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.

  • Amana dishwasher water inlet (fill) valve Common replacement
    Amazon →

More Amana dishwasher codes

Clean Light Flashing 1 Time Clean Light Flashing 1x — Control Module Fault (F1E1) Clean Light Flashing 7 Times Clean Light Flashing 7x — Heating Element Failure F1E1 F1E1 — Control Board Failure F2E1 F2E1 — Stuck Key on Control Panel F4E2 F4E2 — Heating System Fault F6E1 F6E1 — User Interface / Main Control Error

All Amana codes → All dishwasher codes →

Frequently asked questions

What does the F8E2 code mean on a Amana dishwasher?

Amana's documentation lists F8E2 as a fill valve electric error — an electrical fault in the water inlet (fill) valve circuit, not a spray-arm diverter motor problem.

What causes the F8E2 code on a Amana dishwasher?

Water inlet (fill) valve electrical fault: The fill valve solenoid circuit has an electrical fault — an open/shorted coil or a wiring problem at the valve.

Is it safe to keep using a Amana dishwasher with a F8E2 error?

Limited use only. This is rated a serious-severity fault.

How do I fix F8E2 on a Amana dishwasher?

Disconnect power and water to the dishwasher. Locate the water inlet valve connection under the drip tray at the front base of the unit and inspect it for a loose, corroded, or damaged connector. Reseat the connector and restore power; run a cycle to see if F8E2 returns.

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician. Verified against manufacturer documentation: producthelp.amana.com.